Page 1 of 1

Posted: Mon Oct 11, 2010 4:05 pm
by HaraldHeim
Sorry for the delayed reply. Somehow it slipped through my radar.

Yes, it is possible to apply multiple black and white effects at the same time. Sometimes if you apply a selective B/W effect and run B/W Styler again, the color may be removed. In that case you need to readjust the effect again. In general it is best to activate all effects in B/W Styler before leaving the B/W Styler window with OK.

Your problem may also be that the On Start Up option on the Prefs tab sheet is not set to "Previous Settings", which is the default.