Harald,
In FocalBlade 1.03, when I move the "Expand [mask]" slider to the right in (for example) the X-ray negative mask display mode, the white areas get smaller and the black area gets bigger.
This seems like it's backwards. If you expand the mask, shouldn't the white areas in the X-ray negative mode gradually expand to fill the image?
Seems like this is functioning like a "mask erode" rather than "mask expand" functionality.
(Er, well, I suppose it depends on whether you consider the "edge mask" to be a selection of the edges, or a selection of the non-edges.)
Anyway, is this the way "expand" is supposed to work?
John
Expand mask
-
- Plugin Guru
- Posts: 3363
- Joined: Fri Mar 08, 2002 1:00 am
- Location: The Plugin Site
- Contact:
No, I was right
Harald,
I found the combination that causes the issue for me.
If the image is in 16-bit/channel RGB mode, and the display option is x-ray negative, then the expand slider appears to operate opposite from the expected sense: the mask image gets blacker.
If you convert the same image to 8-bit/channel, the expand slider in x-ray negative mode makes the mask image get whiter (which is what I expect).
Also, if you look at other mask display options on a 16-bit/ch image, the mask display seems to work in all other cases as I expect. In other words, this seems to be a problem with the x-ray negative mask preview on 16-bit/channel images only.
John
I found the combination that causes the issue for me.
If the image is in 16-bit/channel RGB mode, and the display option is x-ray negative, then the expand slider appears to operate opposite from the expected sense: the mask image gets blacker.
If you convert the same image to 8-bit/channel, the expand slider in x-ray negative mode makes the mask image get whiter (which is what I expect).
Also, if you look at other mask display options on a 16-bit/ch image, the mask display seems to work in all other cases as I expect. In other words, this seems to be a problem with the x-ray negative mask preview on 16-bit/channel images only.
John
-
- Plugin Guru
- Posts: 3363
- Joined: Fri Mar 08, 2002 1:00 am
- Location: The Plugin Site
- Contact:
Thanks, John! You are right.
However, the Expand slider still works OK in 16 bit mode. The problems is that the mask isn't displayed correctly in X-Ray Negative mode when using the Expand slider. So it is only a cosmetical issue and doesn't influence the sharpening effect at all.
It will be fixed in the next FocalBlade release.
However, the Expand slider still works OK in 16 bit mode. The problems is that the mask isn't displayed correctly in X-Ray Negative mode when using the Expand slider. So it is only a cosmetical issue and doesn't influence the sharpening effect at all.
It will be fixed in the next FocalBlade release.