create hi res/quality enlargements from a low res file

Comments and discussions about Adobe Photoshop
modsquad
Plugin Newbie
Plugin Newbie
Posts: 1
Joined: Sat Dec 14, 2002 7:02 pm
Location: Seal Beach

create hi res/quality enlargements from a low res file

Postby modsquad » Sat Dec 14, 2002 7:11 pm

Hello,
Ok here is the problem and I know I am asking for the world:
Take a low res file and make it (much larger) without the pixelly smoothy/fuzzy look (;create added new clear and sharp information??).
Are there any other programs (plug-ins) on the market that will take a
low res file and enlarge it (up to 500%+) without creating a smooth and smudgy mess?
And yes I have tried (over the past 10 years; I am a 20+ year digital professional retoucher/ illustrator/ artist) every single possible Adobe Photoshop formula in every version since 4.0 (as well as other programs on my SGI box) for doing this to absolutely now avail.
Nothing at all works!
I vaguely recall recently a show on TV explaining (FX Channel??) how they can take now older films (like Apollo 13 for example) shot in conventional 35mm run it through a software (I don't know what?) and create a new CLEAR 70mm larger format (for larger screen theaters?) without the smoothing/fuzzy effect that you commonly get. Apparently
this software has a superior pixel averaging capability that creates or
interpolates "missing information" (if you will)??
Please,please if you know of any software or programs, please list them or perhaps links as to where I can get more information.
Thank you very kindly in advance.

-Peter :D

Roo
Plugin Guru
Plugin Guru
Posts: 64
Joined: Mon Jul 01, 2002 7:11 am
Location: Massachusettes
Contact:

Postby Roo » Mon Dec 16, 2002 6:27 am

You could try Altamira's Genuine Fractals.....though there is a limit to what even that can do.

In my experience there isn't really much you can do to enlarge a low quality image.

HaraldHeim
Plugin Guru
Plugin Guru
Posts: 3325
Joined: Fri Mar 08, 2002 1:00 am
Location: The Plugin Site
Contact:

Postby HaraldHeim » Mon Dec 23, 2002 6:02 pm

According to what I have read lately, the best tools for enlarging images are Genuine Fractals and S-Spline. On second place is Lazcos interpolation which is available, e.g. in the freeware Irfan View at www.irfanview.com.

bkmitch

hi res from low res

Postby bkmitch » Tue Dec 31, 2002 6:20 pm

I've been using Alien Skin Image Doctor with pretty good results. It does a good job reducing the halos around re-sized images and cleaning up pixels. Again, if it's a low res images, you can only go so far.

artzend

Increasing dpi

Postby artzend » Wed Jan 01, 2003 12:33 am

I have taken a frame from a digital video (768 x 576 at 72 dpi) up to 1 metre x 1.25 metres at 300 dpi and had it printed.

I followed Ben Willmore's tip that you only increase the size of your image by 10% increments. This takes a while, but after running unsharp mask you should have a much better image than you would have thought possible.

You didn't state what size or dpi you were starting from and wanted to achieve, but the 10% at a time rule works ok because the software doesn't have to interpret a large section of pixels at a time. It copes better with smaller amounts and if you need to you can clean things up as you go.

Watch the colour discrepancy though, as I found that when I did this with an aqua colour, the greater the dpi, the stronger the blue came through and I had to use Hue and Saturation to fix the final image.

Tim Skyrme
http://www.artzend.com
weekly multimedia freeware newsletter

Threebirds

Miracle Enlarger

Postby Threebirds » Wed Jan 01, 2003 10:00 am

http://www.fredmiranda.com/SI/index.html

A Photoshop Action: $15 US. I've used it and it is amazing. It is an automation of the 10% increase in image size explained below. It is called Stair Interpolation. Think of the possibilities of using low-res low-cost images for print media. Or using a lower res camera and getting high res results. I can't praise this action enough.

-Steve

HaraldHeim
Plugin Guru
Plugin Guru
Posts: 3325
Joined: Fri Mar 08, 2002 1:00 am
Location: The Plugin Site
Contact:

Postby HaraldHeim » Wed Jan 01, 2003 11:29 pm

The incremental 10% enlargement which is also used in the "Stair Interpolation" actions from Fred Miranda was rated as good as Lazcos interpolation in an article which tested several of these methods. But it is said to be less effective than S-Spline and Genuine Fractals.

Everyone can easily create an action in Photoshop that does these 10% enlargements. For example for a 200% enlargement, you need seven 10% enlargements and one 2.6% enlargement.

Overlord_Diabolus

Agrees with Harold...

Postby Overlord_Diabolus » Sat Feb 01, 2003 6:10 am

S-Spline is incredible! I'm always amazed at how crisp and sharp the images come out. ~Hail Thyself~ :evil:

harrie verstappen

reductio ad absurdem

Postby harrie verstappen » Sun Feb 02, 2003 1:59 pm

Interpolation can work very well, up to a point. Now, go all the way down to a one-pixel image and try to enlarge from that. See what I mean? It's what Kodak used to call "false enlargement". The information just does not exist.

Echo Walking

Grow!!!

Postby Echo Walking » Thu Feb 12, 2004 7:35 am

I'm working with a 300dpi image that i need to enlarge into a life size cut out. What do you sugest? Almost 2 meter tall

HaraldHeim
Plugin Guru
Plugin Guru
Posts: 3325
Joined: Fri Mar 08, 2002 1:00 am
Location: The Plugin Site
Contact:

Postby HaraldHeim » Thu Feb 12, 2004 4:07 pm

Currently I recommend Genuine Fractals and S-Spline for extreme image enlargement. Please check which one fits your purpose best.

Lightkeeper
Plugin Expert
Plugin Expert
Posts: 15
Joined: Sun Oct 10, 2004 7:48 am
Location: Colorado Front Range

Postby Lightkeeper » Sun Oct 10, 2004 7:51 am

When using Genuine Fractals or S-spline, is there any need to enlarge in 10% increments, or is this automatic?

David

HaraldHeim
Plugin Guru
Plugin Guru
Posts: 3325
Joined: Fri Mar 08, 2002 1:00 am
Location: The Plugin Site
Contact:

Postby HaraldHeim » Sun Oct 10, 2004 12:40 pm

Please notice that S-Spline was renamed to "PhotoZoom" recently.

You could make 10% increments with both tools, but I wouldn't recommend that. First of all, it means too much work. Secondly, 10% increments remove image details. Thirdly, you can simulate the 10% incremental effect with other means.

The 10% increments have the advantage of increasing local contrast in an image, but the disadvantage of reducing image details. So it is better to apply a local contrast adjustment after the enlargement. To do that you have to apply the Unsharp Mask filter with a high radius value and a small amount value.

Another trick for better quality is to sharpen the image before and after the enlargement.

danielrigano
Plugin Newbie
Plugin Newbie
Posts: 1
Joined: Wed Jan 23, 2008 3:05 pm
Contact:

Postby danielrigano » Wed Jan 23, 2008 3:14 pm

S-spline and the green laser pointer is really unbelievable.
Last edited by danielrigano on Mon Oct 11, 2010 2:59 pm, edited 1 time in total.

apophatile
Plugin Novice
Plugin Novice
Posts: 2
Joined: Sun Mar 02, 2008 4:54 am

Re: create hi res/quality enlargements from a low res file

Postby apophatile » Sun Mar 02, 2008 4:58 am

modsquad wrote:I vaguely recall recently a show on TV explaining (FX Channel??) how they can take now older films (like Apollo 13 for example) shot in conventional 35mm run it through a software (I don't know what?) and create a new CLEAR 70mm larger format (for larger screen theaters?) without the smoothing/fuzzy effect that you commonly get. Apparently this software has a superior pixel averaging capability that creates or interpolates "missing information" (if you will)??


The technology that you're talking about is called super-resolution. Here's a software that uses it (although it's not a plug-in): http://www.topazlabs.com/topazlabs/03pr ... az_moment/ . Some pretty nice examples on their site.

Gd luck

Lesam
Plugin Master
Plugin Master
Posts: 32
Joined: Thu Jan 27, 2005 1:31 pm
Location: Gold Coast Australia

Postby Lesam » Sat Mar 08, 2008 12:42 pm

I am no expert on this, I generally use Irfanview or Genuine Fractals to resize, however an Overview of Seam Carving see
http://www.seamcarving.com/ caught my eye and I found Resizor, a free program at http://www.peterw.000webhost.com/resizor/
which among other techniques uses Seam Carving.
I have not had a chance to really try out the program, so cannot at this time comment with any authority.
The only stupid question is the one you didn't ask

Lesam
Plugin Master
Plugin Master
Posts: 32
Joined: Thu Jan 27, 2005 1:31 pm
Location: Gold Coast Australia

Postby Lesam » Sat Mar 08, 2008 1:27 pm

Apologies, Resizor only uses Seam Carving to reduce image size
The only stupid question is the one you didn't ask


Return to “Photoshop”

Who is online

Users browsing this forum: No registered users and 6 guests